Archive

Category Archives for "How to guide"

Flat Iron Buying Guide 101

Flat Iron Buying GuidePurchasing a flat iron is not such a hard task that you should fear to embark on. There are certain questions you should ask that will help you to make the best choice. This is because some people will mistakenly buy the type of flat iron the saw that their friends bought without taking into consideration that their hair texture and yours are not the same and that the iron which styled their hair might not be good for your hair.

I always answer to anybody that asked me “what flat iron is the best to use? What is the texture of your hair? This is because you will have to have an experience with that particular flat iron so as to know how it works on your hair. Sometimes the iron you may have in mind to purchase might not be the best option for your hair.

To help you make the correct choice when selecting the best flat iron for your hair, you should consider these key questions.

Which is the best plate size?

You should find out the width of the plate that will be suitable for your hair. Like 1-inch plate size is good, but it is not suitable for all hair lengths. Just bear in mind that flat irons come in different plate widths or sizes. Therefore check the article on how to choose the best plate size for your hair length to help you make the correct choice.

Does it have a Variable or Fixed Heat Setting?

The temperature setting on flat irons is categorized into fixed and variable heat settings respectively. Just make sure that you select the one that will be the best for your hair type and styling needs.

Do you have a thin, soft, damaged or fine hair?

If your hair texture falls into any of this category, buying a flat iron with variable temperature settings will be more suitable for you so that you can control the heat of the iron to suit your hair.

Do You Have a Thick hair that is Difficult to Straighten?

The best flat iron for you to use is the one that has a fixed temperature setting. You can heat up the iron, and those disturbing flyaway will have no other choice than to straighten.

Is your hair in between the both of them?

Then you can use any of these heat settings, but I prefer to use the flat iron with a variable setting so that I can control the heat by myself.

Can It Produce Curls?

The flat irons can create curls depending on the styling technique of the stylist. You need to improve on your techniques.

Which Technology is used?

You will have to be careful to choose the flat iron with the best technology build-up because there are similarities in the styling technologies of most of the flat irons in the market.

Is it built with Ceramic or with Ionic?

It is a well-known fact that majority of the professional standard flat irons these days are designed with the ceramic and ionic technology. The combination of this duo is for better production because it has been found out by researchers that ceramic works better when it is combined with other materials. If not, the 100% pure ceramic will make the plates extremely soft, and this will not get the work done. That is the reason there is always a combination of a stronger material to the ceramic.

Aluminum:

This is the material that was used in producing the older version flat irons that are referred to as “drug store species.

There are other materials that are also used to upgrade the flat iron working techniques like Tourmaline, Nano-Titanium, Nano-Silver and others which are infused into the mechanism of flat irons to enhance its working smoothness and snag-free movement.

Nano:

This is a situation where the material with the Nano is broken down into tiny pieces so as to infuse it in the mechanism of the plate of said flat iron.

Ceramic and Nano-Ceramic:

This is where little pieces of Ceramic is added to enhance the smoothing process. It is the Ceramic technology that provides the silky straight end results to the flat iron although there are varieties in their prices. That is why it advisable to purchase the Ghd, HAI, Paul Brown or CHI.

Nano-Titanium:

This material is added to the mechanism of a flat iron to produce ultra-smooth surface; it conducts high heat that will straighten hair 40% faster. It is the best straightening material for hard to straighten hairs. The best to buy is the one from Babyliss or Hot Tools.

Nano-Silver:

This material serves dual purposes. It works as a bacteria eliminator and a smooth surface enhancer. If you are a germ-a-phobic or a stylist, this is best for you. You should buy from FHI Platform or CHI Nano Silver.

Nano-Tourmaline:

This material is the best one that can emit negative ions that can produce the smoothing properties needed. It is amongst the earliest technologies than Nano-titanium and Nano-silver, but it still works nicely on many hair types. You can purchase FHI, Bed head, HAI Elite or T3.

Another question is, did it come with a warranty provision?

It is advisable to purchase a flat iron that has a provision for warranty for at least one year and above so that the company will be liable to any problem that may arise. You should consider HAI, Babyliss. Bed Head or ghd.

Take into consideration these simple questions whenever you want to purchase a flat iron so that you will not make a mistake and purchase the one that will not be suitable for your hair. Carefully choose the flat iron that will not disappoint your styling needs but will have a guarantee of excellent performance with a long life span. Also take note of your styling habits if you are a sporadic stylist, you should buy the one that can accommodate you.

2

How To Choose The Right Flat Iron For Your Hair

How to Choose the Best Hair Straightener for Your Hair

We have laid emphasis on the damaging effect which a flat iron can have on a woman’s hair if not used properly.  We want to examine simple ideas on how to choose the right flat iron for all hair types.Your hair is very unique so it is different from that of your neighbor’s hair.  Even though you may wish it were, yours is beautiful too and thereby needs a different flat iron from hers.

When you step into a supermarket or a beauty salon to buy a flat iron, you may be overwhelmed by so many brands available which you never knew existed. Flat irons come in different sizes, settings, plate types, different temperature and designs which may confuse you if not checked.This guide is organized for you. As you read, you will pick your iron easily and correctly too. Before we go further, you must be aware that the right flat iron depends on the type of hair you have and I hope you have already determined the type of hair you are endowed with.

The two things that should be the focal point for your decision is the temperature and the plate size. As you read on, you will know the best iron to buy according to your hair type and features of the flat iron.

How To Choose The Right Flat Iron For Your Hair

Step By Step Guide How To Choose The Right Flat Iron

PLATE SIZE

The sizes of a flat iron plates differs. There are sizes of 1 inch, 1 ½ inches, 1 ¼ inches, 2 inches and 3 inches.

THICK/COARSE/CURLY

Short, Thick, curly and coarse hair type

If your hair type is within these categories, the recommended plate size for you in a flat iron is 1 ¼ inches.

Long, thick, coarse and curly hair

If you have the above, mentioned hair but it is very long, the plate size to go for any time for the best results is 1 ½ to 3 inches. This plate size will always help you to work very fast by handling a large section of your at a time.

NORMAL HAIR

Long but normal hair type

If your hair is of the long type with a normal texture, the best plate size to buy is 2 inches. This is so because even though your hair may be long, it has a normal and fine texture. You don’t need to pass the hot iron many times on it. The best thing is to work it in one pass to reduce the negative impact of heat on your hair.

Short normal hair

If your hair is normal and short, the best plate size is 1 inches to 1 ¼. This plate size will straighten your hair very fast and effectively too.

THIN/ DAMAGED/CHEMICALLY TREATED

If your hair is already damaged, thinning or chemically treated, the suitable plate size should be from 1 inch to 1 ¼ inches. The hair can be straightened in just one pass to prevent further damages to it if more heat is applied.

TEMPERATURE

Temperature settings for flat iron come from lower range of 140 degrees Fahrenheit to 450F and each level is suitable for different hair types. Let’s go ahead to specify each level to match the hair types.

Well, you must bear in mind that some flat iron come with fixed temperature while some has adjustable temperature. The fixed temperature irons sometimes have 356 degrees as their heat level and therefore cannot go higher. It is on adjustable temperature flat irons on the other hand that you are able to see temperature levels as high as 450 degrees Fahrenheit.

So, your decision to go for either a fixed temperature flat iron or an adjustable iron will be determined by the type of hair you have and if it needs a low or higher heat.

THICK/COARSE/CURLY

If you are blessed with a hair that is thick, you can begin the styling with heat level of 356 degrees. When you try this level and it failed to give you the best result you crave, you can take it higher to 410 degrees with an adjustable temperature flat iron.

A Coarse or curly hair requires more heat at all times. The first thing you have to bear in mind is that if your hair belongs to this category, you will need a high temperature to style it to your liking. One good thing though, this hair types are not damaged easily by heat but are however hard to be straightened with low heat.

NORMAL HAIR

The normal hair types do not need much heat to get straightened or styled. Some of the brands in the market with fixed temperature settings can work wonders on the hair. But, if you want to experiment on different styles and you want to easily control the heat level of your flat iron as you work, you can go for the adjustable temperature flat irons. Well, rest assured that you can find some brands that have adjustable temperature from 170 – 400 degrees Fahrenheit.

THIN/ DAMAGED/CHEMICALLY TREATED

This hair types require low level of heat. If you have a thin or damaged hair, you need to be very careful before using high level of heat on it. With a low level of heat as well, you can achieve great results. However, if you decide to pick a fixed temperature flat iron, you can go for the one set at 360 degrees.

But if you want to go for adjustable temperature flat iron, you can easily use a heat level as low as 170 degrees depending on your hair. It is all depending on your choice.

Let’s not forget the main things you should always remember. Thick, coarse or curly hair types need big plates and higher temperature.

The normal type of hair can be well designed with medium sized plates and medium range of heat depending on the styles you want to add.

The thin damaged or chemically treated hair only needs small size of plates and lower temperature level.

Summarily, you must determine the type of hair you have before buying a flat iron. It is painful to know that, if you fail to handle a woman’s hair with utmost care, it may fall off in chunks.

Please, I don’t wish this on any woman at all. Since you love your hair, follow our guides and take care of it. A healthy hair is a glorious part that accentuates a woman’s beauty and feminine nature.  Believe me; you don’t want to lose that.

If this article was helpful to you, share it so that your friends can also read and learn how to choose the right flat iron suitable for their hair types.

How To Choose Hair Straightener That Won’t Damage Your Hair

How to Buy a Flat Iron That Won’t Damage Your Hair

A good hair straightener is every woman’s beauty companion. It serves as a reliable assistant when it comes to beautifying your hair for all occasions and in every circumstance like when you are in a place or on the go. Flat irons can be used to apply all kinds of styles to your hair thereby effectively expressing the beauty of your hair. It can be used to straighten your hair, apply curls and waves or even flip as the case may be.

Many women can’t do without their flat irons. Some women who are naturally endowed with coarse hair or stubborn curly types find it easy to tame their hair and wear any look they want with the flat iron. The hair straightener is designed with many features that combine efforts to leave users with perfect results all the time.

How to Buy a Hair Straightener

It uses the plates and its heating element to subdue the worst curly hair you can see on a woman and achieve a glossy smooth and shinny results. Some hair straighteners have the features like infrared heat technology that is capable of preventing damages to your hair or even help to restore already damaged hair.

However, there are some things you should know before you buy a hair straightener in order to avoid any damage whatsoever on your hair. This is very important because whether we like it or not, a flat iron can be a double edged sword. It can restore or damage your hair. As you read on, you will see some important things you need to know to avoid regrets after buying and using a hair straightener on your hair.

  • Hair Texture and Types

In order to play it safe with a best hair straightener, you need to know the kind of hair texture you are endowed with. There are different kinds of hair seen on women. There are Fine hair, coarse hair, and curly hair, fine hair, long, short and thick. All these characterize the woman hair. You have to know the type of hair you have before going to buy a flat iron.

  • Plate Technology or Material

There are several technologies found on the plate of a hair straightener. Some plates are Ceramics, Tourmaline, Titanium, etc. Apart from checking these plates technology, you need to look out for these good features on the plates.

It is recommended that any plate that uses infrared heat is always mild on the hair thereby preventing damages. These irons make use of gentle heating method to reach down to the hair shaft and give you a good result without damaging your hair.

Another thing on plates is the ionic technology which is often seen on some flat iron plates. If you have a dry or damaged hair, it is recommended that you choose any hair straightener that has ionic plates because the negative ions produced by these plates neutralize the positive ion charge of stubborn hairs.

One other good feature that prevents damages is choosing a flat iron with Titanium plates. These types of hair straighteners are capable of reducing damages to your hair. This is because of the consistency in heat level while you work with it and it doesn’t affect the results whatsoever. After using, you will still be left with the perfect results and also finish on time too.

Apart from the Titanium plates, the Tourmaline plates are also a good feature on a hair straightener that will help to reduce hair damages on your hair. If you also get an iron with a Tourmaline plate, it will also be added advantage as well.

  • Heat settings

When it comes to buying a hair straightener that won’t damage your hair, you have to also look out for the heat settings on a flat iron before you make a choice. Some temperature settings are as low as 170 degrees Fahrenheit to 450 degrees. Depending on the hair type you have, you must choose appropriately on the setting that wouldn’t cause untold damages. There are 2 types of setting: the fixed and variable settings. Some hair straighteners are already fixed on a high heat level of 450 degrees and you are not allowed to adjust it. Some come with a variable setting which can be adjusted to the heat level that will suit your hair.

If you are endowed with a fine hair thin hair, you don’t need a fixed temperature setting of 450 degrees or else, you will cause more damages. You must go for a hair straightener that has a variable setting so that you can be adjusting the heat level from the lowest to the highest if you require.

A woman endowed with a coarse hair or a stubborn curly hair can preferably go for fixed temperature hair straighteners so that immediately it is powered, the heat can climb up to 450 degrees within few seconds thereby saving time and energy for users.

  • One pass technology

Some hair straighteners are designed to serve your styling needs with just a single pass on your hair. It is advisable to search for flat irons that offer a single pass technology if you have a damaged hair or a thin hair. If a hair straightener can give you the perfect result in just a single pass, the possibility of damages will be very low. You don’t need to pass the iron several times on your hair thereby exposing your hair to heat all the time.

Like I said in the beginning, hair straighteners are part of the important beauty tools which every woman should own. It keeps our hairs smooth, healthy, shinny and sexy.  Given all these great things which a hair straightener can do on the hair, many women are always afraid to use it because of the damages it can cause as well. Yes! This is right but I hope that with the information provided above, it is safe to encourage every woman to get their own hair straightener by following the few details above.

If you found this How To Choose Hair Straightener That Won’t Damage Your Hair article helpful, share with your friends as well.

How To Use A Curling Wand Step By Step Easy Guide

Hello! My Name Is Marie Templeton; I am here to Show you How to Use a Curling Wand? Curling wand is the answer to all problems related to curly hair styles. Sometimes, girls are not satisfied with their straight hair texture. Why not try luscious curly hair styles? Curls add such spice to the life.

Don’t worry, if you have no idea about using the curling wand. In this post, we will learn about utilizing curling wand from start to end. So, next time you can transform straight strands into beautiful curls easily.

How To Choice a Curling Wand?

How-To-Use-A-Curling-Wand-1Always remember, same curling wand won’t produce different curly hair styles. The outcome of curls depends upon your curling wand. Sometimes, people make the wrong choice and end with unwanted curls.

Here are two main factors you have to consider while choosing a Best curling wand:

  • The size of barrel highly matters in the production of curls. If you want tight and retro curls, choose wand with barrel up to 1”. For loose curls, you need barrel larger than 1”.
  • Now, coming to the heating material off Curling Wand. Titanium and Tourmaline are the best materials for developing heating barrels. It is recommended to choose only titanium or ceramic barrels for best quality. If you want to know more How to choose a best curling iron wand, read this awesome buying guide.

Step By Step Guide How To Use A Curling Wand

Heat Preferences:

Honestly, do not prefer curling wand with fixed temperature. As distinctive curls and texture demands different heat settings. So, pay attention to temperature dial or control for accurate styling. Because the wrong temperature can either cause damage or waste your time.

Preparation Of Hair:

Avoid using the curling wand directly on the hair. You need to prepare hair for curling. First of all, comb the hair carefully. You need to make them tangle free. Brush the hair thoroughly. Then use the high-quality hair spray on the hair to reduce heat damage. Always use large clips for holding different sections of hair.

How-To-Use-A-Curling-Wand-1

Separate Hair

Let The Iron Preheat:

Avoid using iron instantly after plugging into the power socket. Once the power is on, let the iron preheat for a few minutes. So, iron can be heated up to the required temperature incorrect intensity.

Heat Resistant Glove:

Seriously, you don’t want o hurt your hand. That’s why put on heat resistant glove. This glove is needed when there is no clamp to hold the hair. That’s why most manufacturers deliver iron with heat resistant gloves in case of no clamp. Otherwise, this step is optional but recommended.

How-To-Use-A-Curling-Wand-1

Arm Heat Resistant Glove

Heat Smaller Sections:

A word of caution never heats up the hair section wider than 1”. Because wider hair will wrap and end up in lumpy or saggy curls. That’s why for perfect curls, always heat hair section smaller than 1”.

Wrap The Hair On Wand:

Now, coming to the main point. You need to hold the hair strands from the end and wrap around the wand. Start from the base instead of center for better contact. Always heat the hair away from the face to avoid heat damage.

If you want loose curls, then wrap hair in a flat manner. For tight curls, wrap the hair by twisting in a perfect manner.

How-To-Use-A-Curling-Wand-2

With The Gloved Hand Wrap Hair Around The Wand

Give Few Seconds To Heat Up:

Give at least 2 – 5 seconds to heat up the hair strands. But be careful, don’t leave the hair for more than 10 seconds. Otherwise, you ruin the hair instead of curling.

Let The Curls Cool Down:

For tight curls, after heating the hair section. Let the hair in curly spiral shape! You can use Bobby pin to do this step efficiently. For tight and retro curls, you need to follow this step. In the case of casual and loose curls, let the warm curls flaunt over freely.

How-To-Use-A-Curling-Wand-2

Let The Curls Cool Down

Repeat The Process Till Last Section:

Repeat the above steps till the last section of hair get curled. Now place them as you wished. It is recommended to use hair spray so they can be the last longer.

How-To-Use-A-Curling-Wand-2

Repeat The Process Till Last Section

Picture Source: Petit Elefant

Summary of The How To Use A Curling Wand

Here are some tips that can make the curling process more efficient:

  • Avoid using the curling wand directly on wet or damp hair. It will ruin the hair without curling them.
  • Pay more attention while wrapping the hair. Otherwise, overlap wrapping will end up in saggy curls.
  • It is recommended not to use a curling wand on a daily basis. It’s a prohibited in that case of high temperature, and high temperature causes serious damage to the hair.
  • Avoid straightening of hair before curling the hair.
  • To avoid heat damage to the hand, use a heat-resistant
  • Do not heat hair more than 10 seconds.
  • Keep the curling wand away from water. Otherwise, you may get electrocuted.
  • Always use a heat protectant spray before the curling.
  • Don’t wrap the swivel cord around the wand because if you do this, it will burn the cord.

So, this was the complete guide, How To Use A Curling Wand. After reading it, you must have no doubts about using a curling wand!

2

How to choose a best curling iron wand step by step Guide

How To Choose The Right size Best Curling Iron Wand?

Most people find difficulty while choosing a best curling iron wand. The curling iron is a prime tool for styling or creating curls. You can’t just visit the shop and pick up the first iron you see. The curling iron is a personalized tool which closely associated with the hair texture. People make the big mistake of buying a wrong curling iron for hair texture. To avoid such problem, here we have composed this guide. Here we will show how you can buy or choose a best curling iron wand.

The Best Curling Iron Wand (Special Pick for You):

Sale
Homitt 5 in 1 Curling Wand Set with 5 Interchangeable Hair Wand Ceramic Barrels and a Heat Protective Glove – Black
  • SIZE OF BARRELS: The sizes of this 5 in 1 clipless curling wand are 0.35-0.71 inch, 0.71-1 inch, 1-1 inch, 1-1.25 inch, 1.25-1.25 inch. These sizes give you five options. Different size can make different hair style, like corkscrew curls, waves, big curls for body and bounce and ringlets.
  • INTERCHANGEABLE: The wand curling wand set has 5 different interchangeable curling iron barrels that click into the handle. The handle has a lock feature so don't have to worry about the barrel coming out while using it.
  • ADJUSTABLE TEMPERATURE: The hair wand heats up quick and easily. The barrel can heat up within 30S. And there is a button that adjust the temperature from 1(374F)to 2(410F).
  • STRONGEST AND DRUABLE: The curling wand set is made of high quality PTC+ pottery coating for barrel, PET material for handle, and the cord has UL certified.
  • WARRANTY: Dual voltage 110-240V, plug meet US standard, and please be advised that we have 12 Months Warranty and 60 Days Money Back Guarantee.

 

 

What Type of curls I want:

best-curling-iron-wand

The first factor that affects the buying process is a type of curls Because every single curling iron creates a different type of curls. Further, this topic has been explained by size and various curls textures. So, without wasting time, let’s dig in!

Barrel Size:

Curling irons have a distinctive range of barrels based on different sizes. The most common range is between 3/8” to 2” width. Every single curling iron of this range produces totally distinctive curls. If you want smaller and tighter curls, small size barrel iron is perfect. You should get large barrel iron for loose curls.

  • If you own thin and flat hair, you must go for small size iron. Because large barrel curling iron will fry up thin hair texture. For a long-lasting effect, use a smaller curling iron for thin hair.
  • Thick hair can retain the shape of curls for a longer time. So loose curls are perfect for thick hair. It means large size curling iron needed here.

Tiny Barrel Curling Iron For Tight Curls:

For creating tight curls, 3/8”,1/2” and 5/8” irons are best. Small size barrels work great for short hair to produce tight curls. If you own naturally curly hair, then tiny & tight curls will last longer than usual. These irons are great for doing last moment touch up. For thin and straight hair, small size barrels are perfect. Well, it will take time for creating tight curls. But the result will be just stunning. These barrels also assist in creating coiled and spiral locks.

Vintage Curls:

You must get ¾” barrel curling iron for vintage curls. Vintage hairstyles include loose curls. If you have medium or short hair, then this size iron will work awesome.

Universal Size Curling iron:

The next time you go to a salon must notice the size of the curling iron. You will see most stylists prefer 1-inch barrel curling iron. Why is that? Because 1 inch curling iron barrel size is great for any curls and length. For newbies, 1 inch curling iron is the good start. Stylists produce awesome short bob and long layered curls using such size. This size is also suitable for creating tight curls.

Curling Iron for Medium To Long Hair:

Stylists face difficulty while curling longer hair. For medium to long hair, 1-1/4 inch curling iron is best. With such size, anyone can produce natural, loose and soft wavy hairstyles. You can use this iron on short hair for getting more volume.

Loose Curls:

One thing is clear, larger the size of barrels, the looser curls. With an increase in width, you will get voluminous loose curls. For large loose curls, 1-1/2” curling iron is the top choice. It works awesome on long hair.

Tousled Look:

2 inch curling iron not used for only creating curls. You can use it on long hair for attaining a tousled look. It only gives rounded texture, but not tight or defined curls.

What Types Of Curling Iron wand is best?

best curling iron wand

Enough with barrels. Now let’s talk about other components related to a curling iron. You must check these items too before buying a best curling iron wand.

Heat Settings:

Every hair texture demands a different temperature range. You must be very careful while picking a curling iron. Always choose an iron with adjustable temperature control. So you can adjust heat according to the hair texture. Don’t use ultra-high-temperature iron like 400 degrees. These irons are best suited to experts. Fro thick hair, 300 – 350 degrees range is perfect. For fine hair, choose iron below 175 degrees.

Curling Wand:

People confuse the curling wand with a curling iron. Curling iron has a barrel with a clamp to hold hair while styling. While in curling wand you to hold hair manually. So always choose curling iron as it has a clamp for convenience.

Shape Of Wands:

Curling iron comes with various wands or barrels which differ in shape. Here are the most popular shapes with their benefits:

  • Cone shaped wand was a versatile curling tool. It has a smaller tip with a thicker base. It assists in creating thicker loose curls and tight curls with the same tool.
  • The straight barrel is common in curling irons. For uniform curls, this is best.
  • Pearl shaped barrel was best for producing natural looking curls.

What Size Curling Iron Wand should I get?

Curly Iron Size and Tips Curling Iron
¼ Inch Super-tight, Small Curls ¼ Inch Curling Iron
½ Inch Bouncy, Tight, Well-defined Curls 5/8 Inch Curling Iron
1 Inch Casual Curls, Well-Defined Waves 1 Inch Curling Iron
1 ¼ Inch Medium, Looser Curls 1 ¼ Inch Curling Iron
1 ½ Inch Looser Curls With Loads Of Body 1 ½ Inch Curling Iron
2 Inch Lose, Barely-There Waves That Give Hair a Subtle Lift 1 ¾ Inch Curling Iron

Heating Material:

Heating material is the core of curling iron. This part produces heat for the flattening of follicles. Here are the most important materials for a curling iron:

  • The Ceramic Tourmaline combination is the best heating material you can find. Ceramic release intense heating while tourmaline spreads heat evenly. Tourmaline also defrizzes the hair.
  • Titanium is another awesome choice. It is popular due to its high conductivity and smooth surface.
  • Cheaper curling irons own chrome or gold barrels. These two provide heat but do not remove the frizz.

So this was the complete guide to buying a Best curling iron wand. I hope, after reading this article, you must have no doubt about curling iron. Now you can pick a right tool for your style cravings!

How to Curl Hair With Straightener Beginners Guide

Curl Hair With Straightener will have bouncy curls instead of ringlets. Curling of hair may seem easy, but the right technique is required to do so. Otherwise, you will end with frizzy and unbalanced ringlets. It takes a little practice to master the technique for getting Curl Hair With Straightener.

Read the article written below to learn How To Curl Hair With A Flat Iron.

Step By Step Guide How to Curl Hair With Straightener

Curly Hair with Straightener

Preparation Of Hair:

The first step to getting Curl Hair With Straightener is the preparation of hair. Always remember, you can’t curl wet hair. Don’t go for damp hair too. Damp hair is also unable to get curled. The best tip is drying your hair to absolute condition. For best result, blow dry your hair. Blow dry gives extra volume, which results in voluminous curls.

Right Choice Of Flat Iron:

Curly-Hair-with-Straightener

The next step is getting the right tool for making curls. In this post, we are going to use a flat iron. To achieve Curl Hair With Straightener, choose a flat iron with 1 – 2” plates. If plates have beveled edges, it will be easier to have excellent curly results.

Now heat the flat iron to the temperature compatible with hair texture. If you have fine hair, set the temperature to the low range. If you own coarse hair, use ultra high temperature.

Curly Hair with StraightenerUse of Heat Protectant:

Always remember that heat damages the hair. To prevent hair from the heat damage, apply Best Hair Protection Spray on the hair. Hair Heat Protectant will prove to be a barrier between hair and flat iron. If flat iron uses far infrared technology, it will lower the effects of heat damage. Apply heat protectant to each section if you have thick plus coarse hair.

Sectioning Of Hair:

Section the hair is the most important tips. Always section your hair otherwise, it will be hectic for to get Curl Hair With Straightener. Without section of your hair, you won’t get a salon quality finish.

Follow these steps for proper sectioning:

  • The bottom layer should be curly first. From nape, part the hair into two main parts. Let the bottom part sway downward. Clip the upper part which can’t bee curled right now.
  • Repeat the process until all sections have been curled.
  • For the last layer, you should curl the hair from front to backward direction.

Different Techniques Of Curling:

Curly Hair with Straightener

There are several techniques to create Curl Hair With Straightener. You may try each one of them on different occasions. I have listed some of them here.

There is a technique called flicks and curls. To curl hair in flicks, grab a small section of hair. Clamp the iron from half down. Now, turn the straightener on itself in the backward direction. This way you can have U-shaped curls. If you move the iron slowly, you get tighter curls. For having curls, start ironing the hair closer to the scalp. But be careful, you don’t want to hurt your scalp. Again move slowly to have tight and long lasting curls.

With flicks and curls, you get loose curls. You should try turning the hair in full turn, and that is a common technique for creating more pronounced curls. So start from the roots and keep turning the iron on itself for having luscious and ringlet-y curls. You may try both techniques on different events as per your choice.

There are two techniques of turning the hair while straightening. One is under and the other is over. You are curling hair halfway or complete way. In both cases, you may decide how to turn the iron. It’s totally up to you. The key difference is that both techniques move in opposite directions. It means you get Curl Hair With Straightenerwith different styles.

Surprisingly, you can have crimped hair using the flat iron. Start from the smaller section closer to the scalp, clamp the hair and turn the iron to the quarter. Now move to the next bit of section and repeat the step in the opposite direction. Keep doing this until the end and enjoy crimped hair style.

How To Curling The Hair With Flat Iron:

Curly Hair with Straightener

Now moving to the most crucial part, that is a making of Curl Hair With Straightener.

  • First of all, use the hair spray on all sections of hair for better curly results. Sometimes it is very difficult to curl coarse hair. In this case, spray on the section just before the curling. This way getting curls will be easier. But avoid using too much of hair spray. Otherwise, you will end up with crunchy and stiff curls which do not look good.
  • Sectioning is the most effective tip for curling hair. You can do sectioning as per your hair texture and demands. For example, smaller sections can end up in smaller and tighter curls. For getting loose curls, you need to divide the hair into larger sections. For getting a fusion look, try both large and small sectioning.
  • After Completed the section of your hair steps, next is ironing the hair. Heat is the prime part which flattens the hair follicles to mold them into curls. You may use the technique discussed above. But creativity is limited to your imagination. For a generic suggestion, you flicks and curls. It is a nice way to start.
  • After curling the hair, you can leave them waving. But for the salon quality finish, you can use additional products. For example, if you have loose curls, move the fingers through the hair, and This will help to achieve more volume in the hair. You should use mousse or hair spray on the hair for holding curls tighter. Use of hair spray is the best way to get long lasting curls.

Curl Hair With Straightener: Bottom Line

An easy guide to getting Curly Hair With Straightener. Although straightening of hair is not an easy task. But anyone who loves the styling and trying out new hair styles can learn easily. You just need to have Best Hair Straightener and information about the curling process. In this article, you were introduced to some most popular techniques and tips on Curl Hair With Straightener. Hopefully, this post proves to be a great help for you.

How To Use A Triple Barrel Waver Step By Step Beginners Guide

How To Use A Triple Barrel Waver

How To Use A Triple Barrel Waver? Hope you can find the perfect answer After Complete our full review instruction.Curling iron has become the basic styling necessity of every style maniac. Triple barrel waver is a unique type of curling iron. With this tool, anyone can produce luscious curls in a short amount of time. It is a versatile tool. With different styling techniques and demands, this tool can assist in making various hair styles. You want loose curls or tight crimping; triple barrel waver is an absolute choice to do so.

In this post, we are going to know how to use this incredible tool. I have explained in detail how to pick best Triple Barrel Curling Iron waver and end up styling amazing curls.

How to Choose Triple Barrel Waver Right Tool:

No matter which styling tool you are going to use, just pick it with care. There are certain things that should be kept in mind while purchasing a triple barrel waver. I have listed down some factors below:

  • Barrel Size: Barrel size is the most important thing in any curling iron. Because the type of curls you want depends on the barrel size. You can not have long tight curls with smaller barrel size. Certain types of curls required different barrel sizes. For example, for loose and free flowing curls, 1-2” barrel size is awesome. In case you want retro style tight curls, then pick waver with 3/8 or ½ barrel size.
  • Barrel Material: Like barrel size, barrel material also has extreme importance. As barrel material is an absolute source of heat. There are certain types of materials available in the market. The most popular material is ceramic. Try to buy a waver with 100% ceramic barrels. Avoid using barrels with ceramic coating, as they chip over time.If you own coarse hair types, titanium barrels are best. Tourmaline barrels serve the purpose best if you want to avoid frizz and static from hair.
  • Multiple Heat Settings: Always pick the curling iron with adjustable temperature control. Because different hair types and curls, need different temperature settings. You cannot use fixed high-temperature curling iron on fine hair. Otherwise, you will end with fried hair. Choose low-temperature irons for fine hair. Medium to high-temperature ranges is best for coarse hair.

How To Take Preparation of Hair:

Never use any curling iron directly on your hair. You need to prepare your hair for proper styling. In this section, I have explained the steps needed for perfect styling. Just follow the steps written below and get ready for luscious waves or curls.

  • Wash Your Hair: It is recommended to wash hair night or day before styling. Freshly washed hair are not suitable for perfect styling. Hair with some product is best for styling. So always wash hair day or night before. But before styling, make sure your hair is dry. This way after styling, your hair can stay healthier and charming.
  • Blow Dry: Make sure your hair is dried out after a shower. It is best to blow dry them. This way, there will be no chances of wet hair. Otherwise, styling the wet hair can break the follicles. So avoid using styling iron on wet hair.
  • Use Heat Protectant: After blow dry, apply some good quality Best Hair Protection Spray . There are plenty of serums and sprays in the market which serves as a heat protectant. With heat protectant, chances of heat damage will lower to a great degree.
  • Use Curl Enhancer: For holding curls and waves for a longer period, use curl enhancer on the hair.

How To Styling Hair With A Triple Barrel Waver:

Here comes the most important part of this post. After choosing the right tool and preparing the hair, styling is the last part. Well, you can use techniques whatever suits you. Here I am explaining the general technique that anyone can follow without any difficulty.

  • Sectioning Of Hair: It is advisable to part the hair into different sections. Avoid styling the hair in bulk. It will be a waste of time and energy. First of all, grab half of hair from the top and secure it to the top with a hair clip. Grab the section of 1 inch and leave the rest. This way, only style the one hair section at a time. While securing the rest with hair clips.
  • Curling: Now with a hot barrel create curls on the I inch section you selected. If you want loose curls, then move away from the roots of the hair. In case you want a vintage look, give curls starting from the roots of the hair.
  • Hold The Waver: While making curls, release the hot barrel from clamp after 4-5 seconds. Avoid holding the barrel for a long time. Otherwise, you will end with fried up hair. Repeat the above-cited process until the last section of hair is having curls.
  • Finishing: In the end, use hair spray of pomade to hold the hairstyle for a longer period.

Final Verdict And Recommendation:

So this is the complete guide to using the triple barrel waver and a great tool for making various curly hair styles. Hopefully, this articles proves to be helpful for you.

2

How To Use Hair Straightening Cream Step By Step Beginners Guide

Step By Step Beginner’s Guide Use Hair Straightening Cream at Home

How To Use Hair Straightening Cream

How To Use Hair Straightening Cream, girls repeatedly ask this question. We don’t deny the natural beauty of the hair type when we are born. Whether its curls or wavy hair, every hair category has its charms and qualities. But what about straight hair? To be honest, no hair type can compete with straight hair.

When you have straight, sleek and shiny hair, people adore you with an extra touch. The compliments you receive with straight hair are out of this world. But what about girls are not lucky enough for this fun! Yes, we are talking about curly hair here.

Every single girl who is born with curly hair must have wished for sleek hair. And it’s not her fault. Straight hair is like an accessory for girls. In fact, straight hair is considered as a default hairstyle for women.

THERMAL STRAIGHTENING CREAM EDITOR’S PICK:

BRAZILIAN BLOWOUT by ACAI PROTECTIVE THERMAL STRAIGHTENING BALM 8 OZ (Package Of 2)
  • A powerful heat-activated treatment features a 100% humidity resistant formula helps effectively straighten waves/curls and regulate frizzy hair shields hair from heat styling and environmental stresses reveals smoother, frizz-free and more manageable hair.

Annoying truth, no matter how much you love your naturally curly hair, once you tried the sleek hair style. You are unable to deny the difference. Straight, shiny hair gives a whole new level to your personality.

So how to straight hair? Well, there are certain ways to achieve straight hair. The easiest method is going to the salon. But yeah, going daily for hair style is not economical. Why not getting a best flat iron? With a flat iron, you can have silky straight hair every single day. But with some good there is some drawback. With a flat iron, you are putting your hair on the verge of damage due to heat.

The question How To Use Hair Straightening Cream is related to this portion. Well, we are luckily living in the world full of alternatives. There is a cheaper and reliable alternative to the salon and flat irons. Hair Straightening Cream! Using straightening cream is perfect for girls who either can’t afford a flat iron or don’t know how to operate it! The Cream works great for girls who need an instant temporary sleek effect.

In this article, we will show How To Use Hair Straightening Cream, for making your hair sleek and shinier.

Step by Step Guide: How To Use Hair Straightening Cream

1: – Clean Your Hair:

First of all, you need to clean your hair. Never try to use hair straightening cream on unwashed hair. You need to shampoo your hair with clarifying shampoo deeply. Now wash your hair thoroughly, make sure no shampoo is rest of in your hair. At this stage, you can perform a test to see if straightening cream is good for hair or not. Apply a little amount of cream on one hair strand, if it breaks or loses its color, you need to change your hair straightening cream.

2: – Sectioning of Hair:

Sectioning of Hair is an important step in the guide on How To Use Hair Straightening Cream. Sometimes girls straight hair with iron or cream by grabbing bunches of hair randomly. That’s not the right way to do the task. You need to section your hair. First of all, from nape of the neck, horizontally part your hair into upper and lower layer. Make these two layers into four sections. You can use pins or small clutches to hold the section. This way your task will be much easier.

3: – Apply Hair Straightening Cream:

Now the main step in How To Use Hair Straightening Cream, applying the cream. It is highly recommended to wear gloves for the safety of your hands. Take a small amount of hair straightening cream in the bowl. With the help of a brush or your fingers, apply some cream on downward sections of your hair. Be careful; this cream should not touch the scalp. After applying cream to all sections, smear the cream gently to the whole area using a wide toothed comb. You need to comb your hair from upward to the end for perfect finishing.

4: – Processing:

Processing the Cream is a crucial step. You have to let the cream on air hair for 15 to 30 minutes. But do the above-told strand test after 5 to 10 minutes, if you want to keep your hair safe.

5: – Wash Your Hair:

After hair straightening cream has the rest, now wash your hair deeply with warm water for 5 to 7 minutes. You have to make sure, every bit of cream washed away. Now dry your hair with a towel. Gently tap towel to dry the hair.

6: – Blow Drying:

Well, blow drying is enough. But in case you want to have a professional finish, you should use a flat iron. First of all, blow dry your hair to 80%. Like previously, divide your hair into sections. With the help of a flat iron, straight your hair by passing iron from upward to the downward direction.

How To Use Hair Straightening Cream

Tips and Suggestions about Straight Your Hair Healthy:

There are some tips to keep your straight hair healthy.

  • Oil your hair daily to keep them strong and avoid their brittle structure.
  • Always wash your hair deeply and thoroughly, this is important before straightening process.
  • Avoid frequent hair straightening to keep hair safe.
  • Wide tooth comb is perfect to eliminate tangles from hair.

Our Final Verdict and Recommendation:

We try to present the complete and detailed guide on How To Use Hair Straightening CreamAfter reading this article, you must have deep knowledge about hair types, flat irons and hair straightening cream. So be brave and straight your hair instantly with hair straightening cream!

Recommended Product :

LISCIO Crystal Cream Straighteners

L’Oreal Paris X-tenso Moisturist Hair Straightener Set for Natural Hair 800ml

How To Use A Hair Straightener Step By Step Beginners Guide

Step By Step Beginners Guide Use A Flat Iron at Home 

How To Use A Hair Straightener

 How To Use A Hair Straightener is the first question asked by a girl after buying a hair straightener for the first time. If you are a girl with curly and thick hair, then feeling envious is so obvious about girls or models who show off their silky and sleek hair. Admit it; every girl wishes to have a hair type that another girl has. It’s rude, but girls can’t help it.

The history of straightening hair is way back to 1700. Since then, girls do whatever it takes to straighten the hair. Usually, girls with curly hair or thick hair start with using conditioners and shampoos. Well, to be honest, these products always fail to make hair sleek for a longer time.

So how to achieve sleek hair! Well, heat is the answer. There is one alternative, and the optimal option is heating the hair. It will let you mold your hair into any type you want. Again girls first look forward to visiting the salon for having awesome hairdos. No doubt, professionals are damn good at this. But think for a sec, is it possible for you to spend $50-$60 daily for a new hairdo. It is inconvenient for every girl. Here we need Good Hair Straighteners or Best Flat Iron.

Owning a flat is the only option we have. A hair straightener is the only explanation for all hair problems. You once spend money to get a great hair straightener. And you can get a sleek and shiny straight hair daily without spending the extra bucks.

So, you got a hair straightener and looking for guidance on How To Use A Hair Straightener. Then, you are at the right place luckily.

In this article, we are going to discuss in detail How To Use A Hair Straightener. So you won’t face any problem while making your hairdo for the first time.

Things That You Will Need For Straightening Your Hair :

Before going to the main part of How To Use A Hair Straightener, Please ensure you have got these items.

  • A Good Hair Straighteners Or Best Flat Iron
  • A Hair Dryer
  • A Tooth Comb
  • Moisturizer
  • Tall Comb
  • Straightening Balm or Pomade
  • Butterfly Clips
  • Smoothing Shine
  • Heat Protection Spray
  • Hair Spray
  • A Brush or Hair Straightener Brush

Step By Step Guide : How To Use A Hair Straightener:

Now move to the important part. Here are the guidelines needed to straight your hair using a flat iron.

  1. First of all, you need to wash your hair deeply with shampoo and conditioner. After washing, dry your hair using a dry towel.
  2. Next thing is applying a little amount of straightening pomade along with moisturiser to the ends and mid-length of the hair. Avoid applying pomade to the roots of the hair. Otherwise, hair will look oily and heavy. With tooth comb, remove all the tangles from the hair.
  3. Dry hair is need before straightening. So now pick up your blow dryer to make your hair dry. Carefully direct the blow dryer from upward to the downward direction. In this way, hair will be free from frizz. In case you got curly hair, use the brush while drying for a smoother finish.
  4. It’s time to divide your hair into sections. Make three sections of your hair.
  5. At every section, use the heat protection spray from 1 inch far from hair. This steps will reduce the chances of hair damage due to heat.
  6. Now the main step. Grab hair from the first section at the lower side. Place your comb, do the downward combing and hold the hair with comb horizontally. Now place the flat iron on the section, carefully slide both comb and flat iron towards the lower end. Repeat the process as per the amount of hair in that section.
  7. Repeat the last step to both other sections. Don’t forget to apply heat spray before straightening.
  8. If you follow all the above, steps and finished straightening all the sections of hair. Grab smoothing shine and apply a little amount on the hair from upward towards the end. It will keep them shinier and frizz free.

Common Mistakes When Straightening Your Hair:

How To Use A Hair Straightener

There are fewer mistakes that most girls do while straightening process. These warnings are a prime part of the guide How To Use A Hair Straightener. Make sure you are not practising that. Otherwise, your whole hard work will end up in the vain.

  • Shower Your Hair: Before the straightening process, washed hair is the requirement. No matter how much conditioners or other products you will use. Until you wash your hair with care, nothing else is important. After a shower, dry them by putting the towel.
  • Wrong Blow Drying: Often girls use the blow dryer in the exact wrong direction. Always use blow dryer upward to the end. Don’t use it in the opposite direction, otherwise welcome hair full of tangles and frizz.
  • Thermal Protectant: Girls sometimes avoid using a thermal protectant. To be honest, you are taking high stakes for your hair by not using heat spray. Because thermal protectant keeps your hair safe from the effects of heating.
  • High Temperature: At start girls use hair straightener at absolutely high temperatures like 400-450 degrees. This range is suitable for professionals. Carefully set the temperature according to your hair type.
  • Sectioning: Sectioning of hair before straightening should not miss. You can’t grab hair randomly and start straightening, and this is not the right way to do that. Always divide hair into small sections.
  • Fewer Passes: Repeat the passes when needed. It is not essential to repeat many passes on one straight section. Instead, create tension by pulling hair and then straight.
  • Finishing Products: At the end of straightening process, must use finishing products. That finishing product keeps your hairstyle for a longer time.

Our Final Verdict and Recommendation:

So this was the detailed article on How To Use A Hair Straightener. From things to process to tips, everything has been written in this guide in utmost detail. Now don’t be envious of other girl’s hairstyles, grab a new hair straightener and start making new hairdos. Don’t let anything stop you from practicing your imaginations. Just be careful and keep your hair with care too.We hope this guide will help you a lot! In case, you find it helpful, please share it with your friends who are in need of guidance about How To Use A Hair Straightener

How To Clean A Hair Straightener Step By Step Beginners Guide

How To Clean A Hair Straightener

How To Clean A Hair Straightenerthe most frequent query asked by girls who love to straighten their hair. Girls don’t deny the natural beauty of their hair types. Girls try their best efforts to embrace what their hairstyles look. But distracting towards new hairstyles is the thing girls can’t help.

Every single day, girls watch other girls with beautiful and silkier hair, their urge to straighten hair jumps on next level. In that situation, buying a hair straightener is the awesome choice. You can use it on a daily basis. In this way, you don’t have to visit the salon. Economical hairstyle instantly!

But the daily or recurrent use of hair straightener leads to residue build up on plates. In that case, it is very important to know How To Clean A Hair Straightener.

Don’t worry; we have so much gratitude and care for our dear users; that ’s this article has been composed.

 What Is A Hair Straightener?

Before knowing How To Clean A Hair Straightener, you must have an idea about a hair straightener. Precisely, Hair straightener is the tool or machine that use to make curls or straighten the coarse hair. There is only one way to reshape the natural type of hair. That is a heating process! When you heat up the hair, you can easily mold them into different curls or waves or bangs. Applications are very limited to your thinking.

Hair straightener has a very old history. Since 1700, girls are trying to make their hair styles better and better with ironing technique. But luckily, we are living in the age, where companies make some awesome flat irons for this purpose. We just need to buy and use the iron!

How To Clean A Hair Straightener:

How To Clean A Hair Straightener is a question you should ask if you own a flat iron. It is very important for hair straightener to be in clean position. Let me explain why we are giving so much pressure on this.

When you use a hair straightener, different oil and products must be used during the process. Another fact is that hair is a protein structure. So when you are heat hair tools, some residue will build up on the heating plates. Trust me; you need to remove that as early as possible.

Why? To be honest, you should do that instantly. Because plates will lose its efficiency. When there is residue on the plates, the first impact will be low heating speed. Secondly, that dirt is going to ruin the plates due to chemical reaction.

You want your hair straightener to live longer; you must clean it regularly. Titanium flat iron should be clean more often, as they have so much capacity for residue build up. At a minimum, hair straightener should be clean at least once in a week.

So coming to the main topic of How To Clean A Hair Straightener. The process of cleaning a hair straightener is pretty easy. It’s not something complicated. The catch is to do the process at regular intervals.

FHow To Clean A Hair Straightenerollowing things are needed to clean a hair straightener:

  • Warm Water
  • Towel or soft cloth
  • Rubbing Alcohol

Now moving to the step by step Beginners’s Guide

  • First of all, plug in the hair straightener. Let it warm for a while.
  • Now unplug the hair straightener and this is a very important step. You must ensure it is unplugged.
  • Now wet the towel in the warm water. Make it wet but not dripping water.
  • Carefully remove the residue build up on the plates.
  • For surfaces, spray the rubbing alcohol and use a clean towel to clean the surfaces.
  • You can repeat this process according to the residue build up on the heating plates.
  • Now let it dry completely.
  • Make sure it is completely dry before your next usage.

Tips For How To Clean A Hair Straightener:

There certain advanced tips for making the process of How To Clean A Hair Straightener, more effective. Using these suggestions is going to make the life of the tool much longer.

  • Water: Water is the best method to clean a flat iron, in case you have no other alternative. Simply damp the towel in the water to make it wet. You can also use a face wipe to remove all the dirt from the plates.
  • Alcohol: Alcohol is the perfect alternative to water. It amazingly washes out all the dirt from the plates. Just make sure, alcohol is not harmful to the plate material.
  • Acetone: Acetone is a highly preferred alternative to clean a hair straightener. In case, there is thick residue build up, spread the acetone for half hour and then wash it with a washcloth.
  • Lemon Juice: Soft cloth soaked in Lemon juice is also an effective cleaning agent.
  • Baking Soda: Thin solution of water and baking soda also acts as cleaning material for plates.

How to clean hair straightener plates On A Hair Straightener:

How To Clean A Hair StraightenerThis guide on How To Clean A Hair Straightener works fine for all hair straighteners. The ceramic plate is the common material in most flat irons. In this part, we are going to learn How to clean your flat iron at home.

Following are the things you will need:

  • Rubbing Alcohol
  • Soft Cloth
  • Tooth Brush
  • Tooth Pick
  • Steel Wool

Now let’s start step by step process.

  • Spray a little amount of rubbing alcohol on the plates.
  • Use a soft cloth to remove all the dirt and residue from the plates.
  • You can use a toothbrush and toothpick to remove stubborn stains.
  • Steel wool is a good alternative to clean the residue. But ensure you are not scratching the plates.
  • Another important thing again does this process while hair straightener is unplugged.

Alternative Method For Clean A Hair Straightener:

Use  Hot Tool Cleaner for Clean A Hair Straightener

How to use of hot tool cleaner

How to Use Hot Tool Cleaner:

A flat iron can be cleaned up using a wet cloth. But sometimes where to build upon heating plates is little larger and sticky. In that situation, a cloth soaked in warm water won’t be a remedy.

Now Hot Tool Cleaner is the perfect alternative. Just follow these easy steps to make your flat iron in great position again:

  • First of all, evenly spray Hot Tool Cleaner on the plates and other surfaces of the flat iron.
  • Now grab the soft cloth or cotton swab to peel off all residue.
  • After cleaning residue completely, dry the flat iron with towel paper or you can use a blow dryer.
  • Keeping the flat iron clean is essential for the longer life of the machine. At least, clean the flat iron twice a week.

Warnings:

Don’t ever immerse your flat iron in the water. Otherwise, you will lose the functionality of the hair straightener permanently. Secondly, always clean the flat iron, while being unplugged. Otherwise, you will be electrocuted.

How to clean a hair straightener flat iron Video Tutorial

Our Final Verdict and Recommendation:

So this was the complete guide on the How To Clean A Hair Straightener. Now you can easily clean any flat iron of any material. It is necessary to keep your flat iron clean for its longer life.We hope this guide will help you a lot! In case, you find it helpful, please share it with your friends who are in need of guidance about How To Clean A Hair Straightener